Integra Stone Bonder

Perfect stone fabrication.

Stone Bonder is a super flexible, dripless/non-sag, low shrink, hard surfacing adhesive designed for the nearly seamless bonding of Natural Stone.
Stone Bonder is a two-part methacrylate, super flexible, dripless/non-sag, low shrink, low exotherm, ultra violet light stable, non-yellowing hard surfacing adhesive designed for the nearly seamless bonding of natural stone products.

Combined at a ratio of 10:1 (10 parts resin, one part activator), Stone Bonder has a working time of 10 to 15 minutes, with a 5 to 10 minute De-Roping Time, and achieves nearly 90 percent of its ultimate strength in 45 to 60 minutes at room temperature curing. [read]

Stone Bonder offers a combination of high strength, stiffness, and toughness as well as the ability to bond very strongly to a wide variety of hard surface or inorganic materials.

Stone Bonder permits the seasoned fabricator the opportunity to apply the adhesive to vertical surfaces, as well as horizontal surfaces, without dripping, and upon gelation, gives the fabricator an extended window (5 to 10 minutes) to de-rope, or trim with a single bladed straight edge razor blade, the excess from the stone slab without ripping the adhesive out of the joint, nor damaging the surface of the stone.[/read]